Using a Phillips screwdriver, unscrew the two screws securing the inner door handle.
Bringing the handle to the window of the inner panel of the door,..
... disconnect the rod from the inner door handle.
Unscrew the lock button.
Using pliers, disconnect the lock button rod from the lock..
...and remove the traction.
To facilitate access to the lock, it is necessary to remove the glass guide. For this…
... use a Phillips screwdriver to unscrew the upper and lower screws securing the glass guide.
We take the glass guide to the front of the door.
Prying with a screwdriver, remove the rod coming from the lock release roller to the lock switch leash.
Using a Phillips screwdriver, unscrew the three screws securing the lock to the end of the door.
We remove the lock from the window of the inner panel of the door.
With a felt-tip pen we circle the contour of the latch on the door pillar.
head «on 10» unscrew the three bolts securing the latch to the body (when adjusting - weaken) …
... and remove the door latch along with the shims.
When installing a new retainer, we save the set of gaskets.
We lubricate the new lock with any grease, connect a rod with a handle to it and install it on the machine in the reverse order of removal. We install the latch and check the operation of the lock.