Disconnect «negative» battery wire.
In the cabin, remove the upholstery of the left side of the body (see Removing the controller).
Disconnect the connector from the APS control unit.
head «for 8» unscrew the two nuts securing the block..
... and remove the block from the studs.
To remove the system status indicator..
... we remove the indicator wires from under the instrument panel and disconnect the two connectors (green and black).
On the inside of the instrument panel, the indicator housing is fixed with a locking bracket.
Taking the bracket off..
... take out the indicator with wires.
We install the indicator and the APS control unit in the reverse order.