The repair of the cleaner consists mainly in editing the deformed parts of the lever mechanism or replacing them with new ones. It is recommended to replace a defective gearmotor with a new one. Of the repair work on the gearmotor, only the replacement of the gear of the gearbox, the cleaning of the manifold and the adjustment of the limit switch are allowed.
To remove the cleaner, remove the brush with a lever, open the hood and disconnect the wires from the battery and the cleaner. Remove the protective casing of the air inlet box and close the heater air inlet cover. Loosen axle nut (fitting) lever and remove the washer with gasket and protective cap. Unscrew the nuts securing the cleaner bracket and remove the cleaner. If necessary, remove the gearmotor from the bracket on the workbench and disassemble the lever drive.
Install the cleaner in reverse order.