- two keys "at 19"
- screwdriver
- ruler
The brake pedal free play is adjusted by moving the brake light switch on the pedal assembly bracket. It should be 3-5 mm.
Adjust only when the engine is not running.
1. Place the ruler on the floor mat (it should be perpendicular to the platform of the brake pedal) and measure the distance from the floor to the pedal pad.
2. Depress the brake pedal, selecting free play, and measure the distance from the pedal pad to the floor. The difference between these measurements will be the free play of the pedal.
3. If the free play of the brake pedal is out of range, adjust it by loosening the nuts securing the brake light switch and...
4....by screwing in or out the switch in the bracket (with a large free play, turn the switch from the bracket towards the pedal, with little or no free play - wrap the switch in the bracket, moving it away from the pedal).
5. Check brake pedal free play again (see steps 1 and 2). Tighten the brake light switch mounting nuts.