Gearbox oil drain plug location
You will need:
- key "at 17"
- oil
- screwdriver
- funnel
The filling volume of the gearbox is 1.8 liters.
The manufacturer recommends using gear oils for the gearbox specified in application.
It is recommended to drain the oil immediately after driving, while the gearbox is still warm.
1. Before changing the oil, remove the rubber cap from the breather and flush it.
2. Use a thin screwdriver or wire to clean the hole in the breather and replace the cap.
3. Unscrew the oil drain plug, having previously placed an oil drain container under the hole. Wait until the oil is completely drained (at least 15 minutes) and close the cork.
4. Remove the oil level indicator from the hole in the rear cover of the gearbox.
5. Insert a funnel and pour new oil into the hole under the indicator.
6. Check the oil level and, if necessary, top up to the top mark.