For normal operation of the lock, adjust the position of the body 14 (rice. 8-15) latch of the lock, having previously loosened the mounting bolts.
Before adjusting the lock, it is recommended to outline the contours of the latch on the body pillar.
If the door closes too tightly, loosen the bolts securing the latch, move it outward and tighten the bolts. If the door does not close tightly, move the latch inward. In this case, there should not be a recession or protrusion of the door relative to the body.
If the door rises when closed (sag in open position), lower the latch.
In case of poor unlocking of the door with the inner handle 1, adjust the position of the handle. To do this, loosen the fastening screws and move the handle together with the bracket to the desired position.
After completing the adjustment, tighten the fixing screws.