Pic. 8-18. Tailgate:
1 - gasket; 2 - loop; 3 - glass seal; 4 - glass; 5 - door; 6 - door upholstery; 7 - overlay; 8 - body opening seal; 9 - gas-filled door stop.
Detach the stops from the door by unscrewing the stop pins from the weld nuts.
Unscrew the nuts securing the door to the hinges and remove it by disconnecting the electrical wires of the wiper and washer tube.
When installing the door, adjust its position in the body opening due to the oval holes for the hinge pins and finally tighten the nuts.
If the door lock (pic. 8-19) is difficult to lock, adjust the lock by moving the body 4 or the latch 5 to the required position.
Pic. 8-19. Tailgate lock:
1 - lock drive handle; 2 - facing of the handle; 3 - drive thrust; 4 - lock body; 5 - lock latch; 6 - rotor; 7 - lever; 8 - return lever.
Replace gas-filled stops with new ones if they do not hold the door open.