Note. On the VAZ 21124 engine (1,6i) intake module installed (see more details. "Engine power system - device, description, diagram").
Removing
1. Remove the receiver (see "Engine receiver 2112 (1,5i) - removal and installation").
2. Remove the oil level indicator along with the guide tube (see point 10 "Fuel rail engine 2112 (1,5i) - removal, disassembly, assembly and installation").
3. Using a 13 mm socket wrench with an extension, unscrew the five nuts securing the intake manifold to the cylinder head (for clarity, the photo shows a view with the fuel rail removed, two nuts (2 and 4) not visible).
4. Taking aside the crankcase ventilation hose, remove the intake manifold from the cylinder head studs and remove it from the engine compartment.
5. Remove the intake manifold gasket from the studs. We clean the mating surface of the cylinder head from the remnants of the old gasket.
Installation
We install the intake manifold on the car in reverse order. At the same time, we replace the intake manifold gasket. Tightening torque of the intake manifold nuts 20.9-25.8 Nm (2.1-2.6 kgf-m).