Disassembly
Turn away a coupling bolt of a plug of the cardan hinge and disconnect an intermediate and top shaft of a steering.
If the upper shaft or its bearings are damaged, flare the coring points of the bracket pipe and remove shaft 15 from the pipe (see fig. 5-1) complete with bearings 11.
If the shaft rotates in the bearings without binding and no axial or radial free play is felt in the bearings, disassembly of the upper steering shaft is not recommended.
If the shaft or its bearings are worn or damaged, replace them with new ones.
Assembly
Reassemble in the reverse order of disassembly. Then screw in two points on both sides of the bracket tube to fix the shaft bearings.