Attention! We carry out work on a viewing ditch or a lift.
ring wrench «at 19» we unscrew the nut of the bolt securing the rod to the rear axle beam, holding the bolt from turning with a wrench of the same dimension.
We knock out the bolt through a soft metal drift.
ring wrench «at 19» unscrew the nut of the bolt securing the rod to the side member of the body, holding the bolt from turning with a wrench of the same dimension.
Removing the bolt..
... and remove the bar.
Replacing rubber bushings is shown in the section Removing the lower longitudinal bar. Install the bar in reverse order. We finally tighten the nuts of the rod fastening bolts in the position «car on wheels».