Removing the steering wheel (see Removing the steering wheel).
Using a Phillips screwdriver, unscrew the self-tapping screw securing the lower part of the casing to the steering column switch..
... and four screws connecting the top and bottom of the casing.
Having lowered the lower part of the casing, we take out the alarm switch.
Prying with a screwdriver, disconnect the stalk wire clamp.
Remove the lower part of the casing.
Remove the rubber ring from the ignition switch.
Remove the top of the casing.
Disconnect the steering column switch wires.
head «for 8» Loosen the stalk switch clamp bolt.
Remove the toggle switch.
Assembly is carried out in the reverse order, while before installing the steering wheel..
...moving ring (switching off) stalk switch set so that the ledge with a hole (for clarity, the hole is filled with white paint) placed on top..
... and we put on the steering wheel in the position of movement in a straight line.