Dark spots all over body
Cause of malfunction | Elimination Method |
1. Application for hot water washing (above 80°С). | 1. Remove minor damage by polishing, in case of significant damage, repaint the body. |
2. Use of leaded gasoline or other coating corrosive substances to remove the wax coating. | 2. Repaint the body. |
Pink spots on light-colored surfaces
Cause of malfunction | Elimination Method |
1. Ingress of coolant. | 1. Polish the damaged areas. |
Light spots on dark-colored surfaces
Cause of malfunction | Elimination Method |
1. Exposure to moisture during long-term storage of the vehicle under an airtight cover. | 1. Polish the damaged areas, repaint the body if necessary. |
Enamel has lost its original luster
Cause of malfunction | Elimination Method |
1. Use of dry cleaning material. | 1. Polish the damaged areas, repaint the body if necessary. |
2. Prolonged exposure to the sun. | 2. Polish, if necessary, repaint the body. |
3. Application for washing the body of substances that corrode the coating. | 3. Polish the damaged areas, if necessary, repaint the body. |
Water enters the interior
Cause of malfunction | Elimination Method |
1. Increased or uneven clearance around the perimeter of the body door. | 1. Adjust the position of the door and the latch of the lock, align the flange of the door opening. |
2. The metal frame of the door seal is crumpled. | .2. Replace seal. |
3. Leak under the windshield seal. | 3. Insert mastic 51-G-7 under the outer foot of the seal. |
4. The valve for draining water from the heater air supply box is clamped by the hose of the vacuum booster. | 4. Install the vacuum booster hose correctly. |
The door opens with great effort
Cause of malfunction | Elimination Method |
1. The axis of the cracker of the door lock is bent. | 1. Replace axle. |
2. Deterioration of the retainer cracker. | 2. Replace the cracker. |
3. Adjustment of position of a door is broken. | 3. Adjust the position of the door. |
The door lock is not locked with a button or is not locked with a key
Cause of malfunction | Elimination Method |
1. The upper end of the external drive lever rests against the shoulder of the external handle. | 1. Bend the upper end of the lever from the shoulder of the handle until a gap of 0.5-2.0 mm is obtained between them. |
The door does not open with the outside handle
Cause of malfunction | Elimination Method |
1. The gap between the shoulder of the outer door handle and the upper end of the outer lock drive has been increased. | 1. Bend the upper end of the lever to the shoulder of the handle until a gap of 0.5-2.0 mm is obtained. |
Door won't lock
Cause of malfunction | Elimination Method |
1. Breakage or weakening of the spring of the central roller of the lock or the lever of the external drive. | 1. Replace the lock. |
2. The riveting of the axis of the lever of the outer drive of the lock has loosened. When closing, the lever tooth does not engage with the ratchet due to the axial displacement of the lever. | 2. Remove the lock and securely rivet the axle. |
3. Seizure of the external drive lever due to coking of grease or dust. | 3. Remove the lock, wash and lubricate the rubbing parts with Litol-24 grease. |
The door is not fully unlocked with the inside handle
Cause of malfunction | Elimination Method |
1. Incomplete stroke of the internal drive lever due to the small stroke of the thrust. | 1. Adjust the position of the inner handle of the lock drive. |
The hood lock is not unlocked by the handle from the passenger compartment
Cause of malfunction | Elimination Method |
1. Breakage of the lock actuator rod. | 1. Replace rod. |
2. Long drive rod length. | 2. Adjust the length of the rod by means of the loop fastening on the hook of the lock. |
The hood does not lock
Cause of malfunction | Elimination Method |
1. Breakage or weakening of the lock spring. | 1. Replace spring. |
2. The lock drive rod has been shortened. | 2. Adjust the length of the rod by means of the loop fastening on the hook of the lock. |
3. The position of the lock on the body is broken. | 3. Adjust the position of the lock. |
Sliding glass does not lock in position
Cause of malfunction | Elimination Method |
1. Breakage of the spring brake of the window mechanism. | 1. Replace window regulator. |
Front seat back when tilted forward (back) moves with great force or stalls
Cause of malfunction | Elimination Method |
1. Increased friction in the nodes of the backrest tilt mechanism. | 1. Lubricate the friction parts of the backrest tilt mechanism and the front seat sled with Fiol-1 grease. |
2. Depreciation of the parts of the backrest tilt mechanism. | 2. Replace worn parts with lubrication. |
3. Destruction of welded joints of the front seat frame parts. | 3. Replace the front seat frame. |
The front seat backrest cannot be unlocked to recline
Cause of malfunction | Elimination Method |
1. Front seat backrest reclining link disconnected. | 1. Fix the rod on the hook of the reclining mechanism, check the operation of the mechanism. |
2. Broken linkage or broken linkage of the backrest reclining mechanism. | 2. Replace the defective parts of the reclining mechanism, check the operation of the mechanism. |
Front seat back not adjustable
Cause of malfunction | Elimination Method |
1. Faulty front seat recline handle holder. | 1. Replace the front seatback recline handle holder, check the operation of the mechanism. |
2. Faulty mechanism for adjusting the tilt of the front seat. | 2. Replace the front seat back frame. |
Difficulty adjusting the front seat
Cause of malfunction | Elimination Method |
1. Jamming of the sliders in the guides due to lack of lubrication. | 1. Lubricate sliders with guides with Fiol-1 grease. |
2. Misalignment of the guides and sliders of the front seat sled. | 2. Adjust the installation of the front seat sled by placing shims under the mounting bolts. |
Heated air constantly enters the cabin
Cause of malfunction | Elimination Method |
1. Faulty heater tap drive. | 1. Check the condition of the drive, fix the rod shell, if necessary, replace the rod. |
2. The heater valve does not shut off the fluid flow. | 2. Replace faucet. |
The air entering the cabin is not heated
Cause of malfunction | Elimination Method |
1. The heater tap does not open due to a malfunction of the tap drive. | 1. Check the condition of the drive, fix the rod shell, if necessary, replace the rod. |
2. Faulty faucet. | 2. Replace faucet. |
Poor air flow into the cabin
Cause of malfunction | Elimination Method |
1. Faulty air intake cover actuator (lid closed). | 1. Check the condition of the drive, fix the rod shell, if necessary, replace the rod. |