Attention! We carry out work on a viewing ditch or a lift.
To check the oil level in the gearbox (in the photo the vacuum amplifier is removed for clarity) …
... the key «for 8» unscrew the oil filler plug.
The cork has a conical thread.
We check the oil level with a rod,..
... inserting it all the way.
The oil level should be at a depth of 15 mm from the top edge of the oil filler hole.
To change gear oil..
... with a spanner «at 13» unscrew the four bolts securing the bottom cover of the gearbox by two or three turns.
Sliding the bottom cover, drain the oil into a substituted container.
After tightening the cover fastening bolts, pour 0.18 liters of gear oil into the gearbox through the oil filler hole. We wrap the plug of the oil filler hole.