Attention! We carry out work on a viewing ditch or a lift.
We take out the cotter pin with pliers..
...and the key «at 22» unscrew the nut securing the middle link to the pendulum arm.
Using a fork puller, we press out the medium-thrust ball pin from the hole in the pendulum lever.
The finger can also be pressed out by applying from below (near the hinge) a sharp blow with a chisel with a blunt end on the pendulum lever.
We take out the ball pin from the eye of the pendulum lever.
Similarly, we press out the ball pin of the thrust from the bipod.
We take out the middle traction.
Install the middle rod in the reverse order.
Attention! Left hinge pin (bipod), in addition to rotation, can swing (as opposed to the right).
At the same time, when installing on a car, we orient the thrust so that..
... so that its longitudinal axis is in front of the hinge axes.