Attention! We carry out work on a viewing ditch or a lift.
So that after replacing the suspension bracket, the transfer case takes its previous position,..
... with scriber (felt-tip pen) we circle the bracket along the contour.
We substitute an adjustable support under the transfer case.
head «at 13» unscrew the two nuts securing the left bracket to the body.
ring wrench «at 17» unscrew the nut securing the suspension bracket to the transfer case.
Having lowered the transfer case on an adjustable support,..
... remove the suspension bracket.
The right bracket is removed in the same way, except that on a VAZ-21214 car, before removing it..
... it is necessary to dismantle the heat shield located above the catalytic converter.
Removing the right bracket (the catalytic converter does not interfere with removal).
We install the transfer box suspension brackets in the reverse order, orienting them according to the marks.